Airbrush Spray Booth
If you haven't got and airbrush spray booth you are probably:
Airbrushing in a room filled with fumes?
Suffering from airborne overspray settling on, and damaging, other items in your room?
Have you tried to solve this problem by creating a cardboard spray box which just isn’t cutting it?
The E420 DC Airbrush Spray Booth
The E420 DC Airbrush Spray Booth pulls a massive 4m3 of air through the filter unit every minute.
The small but powerful motor creates less than 45db which means you won’t be disturbing other family members.
Your spray booth has a pre installed filter which is made up of two layers giving an optimum total thickness (approximately 30mm) and density.
Other suppliers provide filters with a thickness of 20mm. Our filters are approximately 30% thicker and provide a massive surface area, fantastic air flow and ultimate performance.
Our filters can also be rinsed through to remove overspray which will, in turn, increase the life of the filter before it needs replacing.
We also have a huge stock of Replacement Filters manufactured to the same exacting standards.
The E420 DC Portable Airbrush Spray Booth folds away to 41.5cm x 14.5cm x 19.5cm and becomes its own carry case with handle.
When extended and fully set up it provides a workable spraying area of 42cm wide x 33.5cm deep x 33cm tall (max).
The Airbrush Spray Booth has been manufactured for us in stylish and durable black plastic.
However an Airbrush Spray Booth Exhaust Kit can be fitted at a later time if required.
These are easily fitted by simply offering up the end fitting plate, of the air exhaust kit, to the spray booth air outlet vent and then turning in a clockwise direction.
Grab fittings, within the end plate, attach to the air outlet vent grill to provide a firm hold.
All of our air brush spray booths are supplied with a fully rotating turn table which has a diameter of 19cm.
Ideal for the airbrushing of models, miniatures, war gaming figures and cake decoration.
Our Airbrush Spray Booths have been designed so that two units can be fitted together.
This is a simple process of removing a side panel (push/snap fit) from each spray booth and then connecting the two canopies together (push/snap fit).
This will give you the power of two units and a massive working area of 84cm wide x 33.5cm deep x 33cm tall (max). Ideal for the spraying of larger scale projects.
Scale Hangar 182
Dawid Branski is the creator of "Scale Hangar 182" YouTube channel.
He has over 52,000 subscribers which is down to his incredible ability to create fantastic works of scale model art.
We are proud to say that Dawid will only use a BARTSHARP Airbrush® Spray Booth and airbrush spray booth filters because of the level of performance that they provide.
Please click the image below to visit "Scale Hangar 182" and to see the incredible work created by Dawid.