Home » Airbrush & Airbrush Kit » BARTSHARP Airbrush » BARTSHARP Airbrush 183 Dual Action Gravity Feed

BARTSHARP Airbrush 183 Dual Action Gravity Feed

(1 customer review)


  • Dual Action Gravity Feed Airbrush
  • Fitted With 0.5mm Needle / Nozzle
  • New Larger Design Nozzle & Nozzle Cap
  • Can Also Be Fitted With 0.3mm or 0.8mm Needle / Nozzle
  • Three Interchangeable Top Feed Paint Cups – 2cc, 5cc & 13cc
  • Rear Handle Cut Out
  • Needle Adjust Screw
  • Full Range Of Spare In Stock
  • One Year Warranty
  • Free UK Shipping

12 in stock

SKU: BARTSHARP Airbrush 183 Category:


Why Should You Consider Buying From The BARTSHARP Airbrush® Range?

Read more

BARTSHARP Airbrush® 183


The BARTSHARP Airbrush® 183 is a pen style dual action, gravity top feed airbrush.

Dual action: push down, on the trigger for air, and pull back, on the trigger, for paint.


The BARTSHARP Airbrush® 183 incorporates a brand new nozzle and nozzle cap design.

The nozzles are of a larger physical size whilst retaining the same inner dimensions (0.3mm, 0.5mm and 0.8mm)

186 airbrush dual action airbrush gravity feed airbrush

These new nozzles are a complete change from the standard design making nozzle change and airbrush cleaning a breeze as they simply push into the airbrush and are held in place by screwing the air body cap down using the included tool (as shown in images).

No more fiddling with a super small nozzle and nozzle spanner.

Our customers have provided exceptionally good feedback on this new design as it has improved paint flow and greatly reduced paint blockages.


The BARTSHARP Airbrush® 183 is fitted with a quality 0.5mm needle, nozzle and nozzle cap.
This set up is for general purpose spraying and will allow you to create a line spray width up from 0.5mm to approximately 28mm.

It can also be fitted with a 0.3mm needle/nozzle set for creation of finer lines and greater detail.
Alternatively it can also be fitted with a 0.8mm needle/nozzle set which is ideally suited to those wishing to spray slightly thicker mediums, such as with cake decoration or specialist paints or lacquers.

This larger size set up optimises a smoother paint flow and will help to prevent clogging and splatter associated with the use of smaller needles and nozzles.


The BARTSHARP Airbrush® 183 comes with three fully interchangeable cups:

2cc, 5cc (with push fit lid) and 13cc (with push fit lid)

The air inlet is 1/8BSP which is the most regularly used size for airbrushes and air hoses alike.

(BSP stands for British Standard Pipe and describes the thread pitch, whilst 1/8 is equal to 9.35mm (approx)


The 183 Airbrush also has a needle adjust screw.

This is situated on the rear handle and can adjusted to pre-set how far the needle can be pulled back. This means that lines, of the same thickness, can be created many times.


183 Airbrush - Suitability & Paint


Are you looking to get started in airbrushing but just don't know where to begin?

We are here to help you with free advice to help you understand the basics, which can be quite overwhelming!

Please take a little time to read through our user guides as these will help you understand how to use an airbrush, how they work and the common words and phrases used to describe them.

Airbrushes And Associated Terminology Explained

A Guide To Airbrushes And Their Particular Applications

Airbrush Paint Guide


Are You Looking For An Airbrush Compressor Or Complete Airbrush Compressor Kit?


BARTSHARP Airbrush® stocks a fantastic range of compressors which are also available as kits which offer great savings.

Please click on the link below (for the main airbrush compressor page) or on one of the images to be taken to that individual model.

Airbrush Compressors & Airbrush Compressor Kits


Additional information

Weight.590 kg
Dimensions29 × 15 × 8 cm

1 review for BARTSHARP Airbrush 183 Dual Action Gravity Feed

  1. David Branski – SCALE HANGAR 182 YouTube Channel

    Scale Hangar 182 YouTube Channel – over 52,000 subscribers

    Video review of BARTSHARP Airbrushes 133, 180 & 183 – Exceptional performance and value for money!

    Best budget Airbrush and compressor for scale modelling – My setup


Add a review

Your email address will not be published. Required fields are marked *

Content missing