Why Purchase A TC802 Airbrush Compressor?
You will have spent many hours and hours looking for an airbrush compressor that is right for your needs.
One that is reliable, value for money, looks good and performs to the highest standards with trouble free use.
Don't worry, we went through the same frustration spending almost two years researching manufacturers and testing compressors to ensure that we found a range that we are proud to put our name to.
A range that offers outstanding performance, exceptional build quality and a quieter operating noise level.
How do we know that we have now got it right..?
TC802 Airbrush Compressor
1.8m Electric Cable with UK 3 Pin Plug
Dimensions: 255mm x 135mm x 205mm
The TC802 airbrush compressor is described as “on demand” as it will automatically start, when the airbrush trigger is pushed to release air, and stop when the trigger is released.
It has a powerful 1/5th horsepower electric motor which easily beats the performance of the most commonly available AS186 airbrush compressor with it’s smaller 1/6th horsepower motor.
The airbrush compressor produces 23 – 25 litres of air per minute via a single oil-free piston which ensures that your paint is not contaminated with oils and greases found in other style compressors.
The airbrush compressor is fitted with an air pressure regulator / water trap which is fully adjustable and has a display dial showing the pressure of the air being delivered to the airbrush.
Water vapour and heat are by products of placing air through a mechanical process such as compression. The pressure regulator also acts as a water trap to prevent your paint becoming contaminated.
The air pressure regulator has a 1/8BSP male air outlet.
1/8BSP is approximately 9.35mm in diameter. BSP denotes the type and pitch of thread and stands for British Standard Pipe.
1/8BSP is the most common size and type of thread used with airbrushes and associated products, including; air hoses, quick disconnect couplers and air hose manifolds.
Knowing how to set the air pressure regulator correctly can be a little confusing if you have never done it before.
Please watch the below video which provides a step by step guide.
BARTSHARP Airbrush® 130
The BARTSHARP Airbrush 130 a dual action gravity feed airbrush, fitted with a 0.3mm needle, nozzle and nozzle cap.
The paint cup has a 7cc capacity.
The air inlet is 1/8BSP (approximately 9.35mm) which is the most common size for airbrushes and air hoses.
It is recommended for use with air pressure between 15 to 50 psi and is ideal for use with most commonly available compressors
This airbrush will work perfectly with any of the compressors available in our range.
BARTSHARP Airbrush® also sells this compressor as a Complete Airbrush Kit available with two airbrushes: