Why Purchase A BARTSHARP Airbrush Compressor TC90?
You will have spent many hours and hours looking for an airbrush compressor that is right for your needs.
One that is reliable, value for money, looks good and performs to the highest standards with trouble free use.
Don't worry, we went through the same frustration spending almost two years researching manufacturers and testing compressors to ensure that we found a range that we are proud to put our name to.
A range that offers outstanding performance, exceptional build quality and a quieter operating noise level.
How do we know that we have now got it right..?
TC90 Airbrush Compressor
1.8m Electric Cable with UK 3 Pin Plug
Dimensions: 210mm x 140mm x 330mm
The TC90 airbrush compressor has two power modes:
The first is Auto Start, Auto Stop.
As soon as the airbrush trigger is pressed the compressor will automatically start to run and provide pressurised air.
Once the airbrush trigger is released the airbrush compressor will automatically stop pumping.
The second switch position places the airbrush compressor in to a constant pumping mode.
This feature enables the user to achieve higher levels of air pressure for short durations, which may be required by certain types of paint (candy / pearl / metallic / top coat lacquer) for correct atomisation.
A higher air pressure may also be required during the spraying of t-shirts, or other fabrics, to embed the medium in to the material.
It has a powerful 1/3rd horsepower electric motor which easily beats the performance of the most commonly available AS186 airbrush compressor with it’s smaller 1/6th horsepower motor.
The airbrush compressor produce a massive 30 – 35 litres of air per minute via twin oil-free pistons which ensures that your paint is not contaminated with oils and greases found in other style compressors.
It is also fitted with an air pressure regulator / water trap which is fully adjustable and has a display dial showing the pressure of the air being delivered to the airbrush.
Water vapour and heat are by products of placing air through a mechanical process such as compression. The pressure regulator also acts as a water trap to prevent your paint becoming contaminated.
The air pressure regulator has a 1/8BSP male air outlet.
1/8BSP is approximately 9.35mm in diameter. BSP denotes the type and pitch of thread and stands for British Standard Pipe.
1/8BSP is the most common size and type of thread used with airbrushes and associated products, including; air hoses, quick disconnect couplers and air hose manifolds.
Knowing how to set the air pressure regulator correctly can be a little confusing if you have never done it before.
Please watch the below video which provides a step by step guide.
BARTSHARP Airbrush® 130
The BARTSHARP Airbrush 130 a dual action gravity feed airbrush, fitted with a 0.3mm needle, nozzle and nozzle cap.
The paint cup has a 7cc capacity.
The air inlet is 1/8BSP (approximately 9.35mm) which is the most common size for airbrushes and air hoses.
It is recommended for use with air pressure between 15 to 50 psi and is ideal for use with most commonly available compressors
This airbrush will work perfectly with any of the compressors available in our range.
This Airbrush Compressor Is Available As A Complete Airbrush Compressor Set With Two Airbrushes