BARTSHARP Airbrush Kit 183K
The BARTSHARP Airbrush Kit 183K offers incredible value and includes a BARTSHARP Airbrush 183, 1.8m air hose, airbrush quick disconnect, mini in line air filter, air hose adaptor and spare needle / nozzle / nozzle cap set in 0.3mm and 0.8mm. It is fitted with a 0.5mm needle / nozzle set / nozzle cap set.
You may have come to our page as you have seen airbrushes, from the BARTSHARP Airbrush range, which are used exclusively by YouTube scale model experts "Scale Hangar 182" & "Alex Modeling" with over 150,000 subscribers!
Why Should You Consider Buying From The BARTSHARP Airbrush® Range?
The BARTSHARP Airbrush® 183 is a pen style dual action, gravity top feed airbrush.
Dual action: push down, on the trigger for air, and pull back, on the trigger, for paint.
The BARTSHARP Airbrush® 183 incorporates a brand new nozzle design.
The nozzles are of a larger physical size whilst retaining the same inner dimensions (0.3mm, 0.5mm and 0.8mm)
These new nozzles are a complete change from the standard design making nozzle change and airbrush cleaning a breeze as they simply push into the airbrush body cap and are held in place by screwing the nozzle cap down with the included tool.
No more fiddling with a super small nozzle and nozzle spanner.
Our customers have provided exceptionally good feedback on this new design as it has improved paint flow and greatly reduced paint blockages.
The BARTSHARP Airbrush® 183 is fitted with a quality 0.5mm needle, nozzle and nozzle cap.
This set up is for general purpose spraying and will allow you to create a line spray width up from 0.5mm to approximately 28mm.
It can also be fitted with a 0.5mm or 0.8mm needle/nozzle set which is ideally suited to those wishing to spray slightly thicker mediums, such as with cake decoration or specialist paints or lacquers.
This larger size set up optimises a smoother paint flow and will help to prevent clogging and splatter associated with the use of smaller needles and nozzles.
The BARTSHARP Airbrush® 183 comes with three fully interchangeable cups:
2cc, 5cc (with push fit lid) and 13cc (with push fit lid)
The air inlet is 1/8BSP which is the most regularly used size for airbrushes and air hoses alike.
(BSP stands for British Standard Pipe and describes the thread pitch, whilst 1/8 is equal to 9.35mm (approx)
The 183 Airbrush is also fitted with a needle adjust screw.
This is situated on the rear handle and can adjusted to preset how far the needle can be pulled back. This means that lines, of the same thickness, can be created many times.
Also included in the kit is: spare needle / nozzle sets (0.3mm and 0.8mm), 1.8m air hose, airbrush quick release, mini in line airbrush filter and an air hose adator (1/4BSP female to 1/8BSP male)
This complete airbrush kit contains everything that you will need to start airbrushing.
Are you looking to get started in airbrushing but just don't know where to begin?
We are here to help you with free advice to help you understand the basics, which can be quite overwhelming!
Please take a little time to read through our user guides as these will help you understand how to use an airbrush, how they work and the common words and phrases used to describe them.
Are You Looking For An Airbrush Compressor Or Complete Airbrush Compressor Kit?
BARTSHARP Airbrush® stocks a fantastic range of compressors which are also available as kits which offer great savings.
Please click on the link below (for the main airbrush compressor page) or on one of the images to be taken to that individual model.