Large Airbrush Spray Booth LED Lights & Waterfall
If you haven't got a large airbrush spray booth with exhaust kit and LED lights then you are probably:
Airbrushing in a room filled with fumes?
Got airborne overspray settling on, and damaging, other items in your room?
Struggling to see the detail on your project?
Have you tried to solve this problem by creating a cardboard spray box which just isn’t cutting it?
Airbrush Spray Booth LED Lights & Waterfall
Our airbrush spray booth with exhaust kit and LED lights provides an excellent spraying environment and will prevent airborne over spray damaging other projects and personal items and will also help you to minimise health risks associated with many airbrush paints and other mediums.
(We strongly recommend using a quality face mask)
If you do not need to remove contaminated air but wish to effectively capture damaging overspray then please view the below model:
How Does An Airbrush Spray Booth Work?
The spray booth has easy to collapse and erect base, sides and canopy which creates a dedicated spraying area.
The unit is powered by a small but powerful electric motor which drives a fan, located at the back of the airbrush spray booth and which, in turn, creates an airflow.
Contaminated air and overspray is drawn, by the airflow, to the back of the spray booth and through the large filter pad.
Overspray is caught on the front surface of the filter pad whilst contaminated air passes through the filter material and is then expelled out of the rear of the unit.
Are all airbrush spray booths the same?
Many of the models available do not have a motor which is powerful enough to pull a sufficient volume of air from the spraying area and through the filter material.
The result of this is that overspray is not removed from your immediate working area, possibly damaging the detail on your project and then passing out into your room to settle on and damage other items.
This will also mean that air, contaminated with airborne particles, is not being drawn away from you or your project.
This can be hazardous to your health as even water based paints have a small amount of VOC (volatile organic compounds) which can affect your major organs and general health.
Density and size of filter material is just as important as volume of airflow through the unit as both will affect the performance of the spray booth.
Filter material, which is not deep enough, will have a greatly reduced total surface area which will enable the air to pass through the filter without optimised capture of contaminated air and overspray.
Units without an exhaust kit will simply push contaminated air out of the back of the booth and into the general working environment.
The chances are that any exposed surface may then receive a very fine layer of paint. Your health may also be at risk from re-circulated VOC.
Conversely; filter material which is too dense will have a greatly reduced airflow which makes having a spray booth pretty pointless.
BARTSHARP Airbrush SB05 Large Airbrush Spray Booth With Waterfall
The BARTSHARP Airbrush SB05 Large Airbrush Spray Booth with waterfall is the very latest addition to our range of airbrush spray booths and is our top performing model.
Our other airbrush spray booth models extract a massive 4m³ per minute, however, the SB05 Large Airbrush Spray Booth with waterfall pulls an incredible 11m³ of air through the filter unit every minute! This is more than twice the performance.
The portable airbrush spray booth has three inbuilt extractor fan units which displace contaminated air into one air outlet and exhaust air hose.
The power of the extractor can be fully adjusted by turning up, or down, the control dial.
The small but powerful motors create less than 53db which means you won’t be disturbing other family members.
The unit has a power converter (DC12V 5A) with fitted 3 pin UK plug. The cable, from plug to power converter, is 140cm / 55" long, whilst the cable, from the power converter to spray booth inlet jack, is 91cm / 36" long.
Your spray booth has a pre installed filter which is made up of two layers giving an optimum total thickness (approximately 30mm) and density.
Other suppliers provide filters with a thickness of 20mm. Our filters are approximately 30% thicker and provide a massive surface area, fantastic air flow and ultimate performance.
Our filters can also be rinsed through to remove overspray which will, in turn, increase the life of the filter before it needs replacing.
We also have a huge stock of Replacement Filters manufactured to the same exacting standards.
Portable Airbrush Spray Booth With LED Lights and Waterfall
The SB05 Airbrush Spray Booth With Lights has three strips of super powerful LED lights.
These lights simply push fit into each other and the spray booth frame and produce an incredible 24300LM of crystal clear light.
Our other spray booth models provide 1200LM of light so the increase in illumination power is easy to see.
The SB05 Portable Airbrush Spray Booth folds away to 60cm x 27cm x 46cm and becomes its own carry case with handle.
When extended and fully set up it provides a large working spraying area of 47cm x 30cm x 39cm.
Total footprint (when set up) is 60cm wide x 49cm deep x 50cm tall (max).
The unit can be pushed fully back against a wall as the exhaust air hose exits out of the top of the spray booth.
The unit rests on 6 feet which are fully adjustable (height) so that a perfect working level (front to back and side to side) can be set.
Water is pumped from the sump unit and cascades down the waterfall curtain**. This process captures over spray and removes it from the working area.
The powerful air fans provide direction of air flow ensuring that the over spray is mainly captured by the moving water (the air filters capture any further overspray).
Water, having passed over the waterfall curtain, returns to the sump via carbon filters before being recirculated.
The waterfall curtain, measuring 47cm x 28cm, is powered by an internal pump located in a water sump which is housed under the body of the spray booth.
The output of the pump is 15L/min with a maximum operating head of 1.5m and max water temperature of 35℃.
Minimum operating water level is at 6 litres and max operating water level is 9.5 litres.
**Before using, and as part of general maintenance, you should clean the water curtain screen with a gentle window cleaning solution. This will ensure that the water cascade covers the entire screen.
Paint may adhere to the water screen curtain if the waterfall does not provide complete coverage. This will, in turn, affect the performance of your spray booth.
The Airbrush Spray Booth has been manufactured for us in stylish and durable black plastic.
The Airbrush Spray Booth Exhaust Kit is included and supplied with all necessary fittings.
The hose is highly flexible and can be compressed, for more compact spaces, or extended to approximately 5 1/2 foot.
The kit includes a specifically designed slim end fitting so that the exhaust hose can be vented out of a window with minimum opening.
All of our air brush spray booths are supplied with a fully rotating turn table which has a diameter of 19cm.
Ideal for the airbrushing of models, miniatures, war gaming figures and cake decoration.